![]() You should then insert the downrod into the collar yoke and rotate it until all elements click together. Then, thread the main (blue, black, white) wires through the canopy and the downrod. Now, it is time to install a downrod (a pipe that will connect the motor to the fan itself) on the mount so that the ball-like end is pointed towards the ceiling. Pull all wires through the central hole of the bracket, as you will need them later on. If the Harbor Breeze fan comes with a J-hook, install the bracket so that the hook faces the floor. You should use lock washers and mounting screws. Finally, secure the mounting bracket to the electrical box. Then, you remove the mounting bracket from the canopy. You will use them later on in the process. ![]() You should start by removing the Harbor Breeze motor screws. The next step is to install the mounting bracket for your fan. Your fan needs to be at least 7 feet above the floor and have no obstructions at least 24 inches from the blade tips. ![]() Also, keep the light switch in the OFF position. If you need to do some additional wiring to get the fan up, calling a professional might be best.Īlways remember to turn off your electricity at the main fuse/circuit box while you work. Before you begin the installation process, the first and most important step is to read the instruction manual that comes with the fan thoroughly.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |